Terms

These terms cover the estimates G.A. Building Group Pty Ltd (ABN 42 150 770 924) prepares through this site.

Ordering Through This Site

When you order through this site, the job, answers and fee on the form are your Quote, and paying the fee accepts it and the Estimating Services Terms and Conditions below.

Your Estimate

We prepare your estimate from the plans and answers you send us, and George checks and approves every one before it's emailed to you as a PDF within 48 hours (two business days). Your estimate is a guide for budgeting, and the final price comes from trade quotes, your selections and your building contract. Lines marked as an allowance or a quote are still to be confirmed. Your estimate is valid for 30 days from the date on it.

Your Plans

Only send plans you have the right to share. We use your plans and details to prepare your estimate and to contact you about it. Your plans are read by George and by the AI services that prepare the estimate.

Payment

You see the fee on the form before you pay. You pay by card through Stripe, and we never see your card details. Your tax invoice comes by email.

Refunds

If we can't prepare an estimate from the plans you send, we'll tell you why and refund your fee in full. Once your estimate has been sent, we don't refund for a change of mind.

Estimating Services Terms and Conditions

The quotation or accepted scope confirms each project’s fee, specific deliverables, document revision, assumptions and agreed timeframe. These terms apply to estimating services only; they are not building or supervision contract terms.

01 Parties, Engagement and Acceptance

These terms govern estimating services supplied by G.A. Building Group Pty Ltd (ABN 42 150 770 924), referred to as “we”, “us” or “G.A. Building Group”, to the client identified in the accepted written quotation or engagement correspondence (“Client”).

The agreement comprises the accepted quotation or written scope (“Quote”), these Terms and any expressly agreed written changes. Project-specific details in the Quote take precedence where there is an inconsistency. A Client accepts the engagement by confirming the Quote in writing (including by email) after receiving or having access to these Terms. Merely receiving a Quote does not constitute acceptance.

02 Services and Agreed Deliverables

We provide only the services and deliverables expressly identified in the Quote. Depending on the engagement, these may include detailed construction cost estimates; material and labour quantities; trade-by-trade cost-centre breakdowns; Bills of Quantities (BOQs); tender estimates; production estimates; and Master BOQs for nominated designs.

The Quote will identify, where relevant, the estimated project scope, pricing basis, deliverable format (for example PDF, Excel or other agreed export), and any specific exclusions. Native DataBuild files, supplier purchase orders and ongoing estimating support are provided only where expressly included.

03 Items Not Included Unless Agreed

Unless the Quote expressly states otherwise, our fee does not include the following:

  • Obtaining, negotiating or validating live supplier or subcontractor quotations, or contacting trades to procure tender responses. Rates and allowances may instead be derived from available cost information and the project requirements.
  • Site inspections or measured surveys; design, architectural, engineering, energy rating, compliance certification, building approvals or permit applications.
  • Tender administration or tender submission; procurement and contracting; construction, site supervision or project management; and financial, legal, insurance or valuation advice.
  • Independent verification of concealed or latent conditions, demolition hazards, contamination, asbestos, rock, groundwater, service locations or other unknown site conditions.
  • Any cost component not expressly included in the agreed scope, including authority fees, professional consultants, finance, contingency, builder’s margin, GST or escalation where these are excluded or left as separate allowances in the Deliverables.

04 Client Documents and Responsibilities

The Client must provide accurate and complete available plans, specifications, schedules, engineering information, site and location details, applicable addenda, relevant tender instructions and any known constraints before commencement. The Client must identify the drawing versions to be priced and notify us promptly of changes or conflicting information. The Client warrants it has permission to provide project information for the stated purpose. We may request clarification or proceed on disclosed reasonable assumptions where information is incomplete, subject to any material scope or fee changes being agreed in writing. The Client remains responsible for checking that the agreed scope matches its project and tender requirements.

05 Estimate Basis, Assumptions and Market Movements

We prepare estimates with reasonable care and skill from the documents, scope and information available at the time. Any stated rate, quantity, allowance, contingency or exclusion is based on the agreed pricing assumptions and should be read with the accompanying qualifications.

Construction prices and final quantities can change due to market conditions, supplier availability, design development, workmanship methodology, site conditions, location, lead times, inflation and tender responses. Unless agreed in writing, pricing is indicative as at the date of preparation and is not a guaranteed supplier price, fixed-price construction offer or promise that any builder will construct for the estimated amount.

Any provisional sum or allowance is an estimate for an item not sufficiently specified or priced; it is not a firm quotation. The Client should verify material decisions, current market pricing and significant allowances before signing construction contracts, committing to procurement or submitting a binding tender.

06 Software and AI-Assisted Estimating

We may use DataBuild, spreadsheet systems, digital take-off tools and AI-assisted workflows to support measurement, categorisation, document review and cost analysis. We apply reasonable professional review and quality checks to the final Deliverables rather than relying solely on automated outputs.

We treat Client documents as confidential. We will not knowingly upload identifiable confidential project documents to public generative-AI services without the Client’s prior written consent. We may use appropriate business software and service providers subject to reasonable data-security and confidentiality safeguards. A Client requiring specific software or information-handling restrictions must advise us before the Quote is accepted so their effect on scope, cost and delivery can be considered.

07 Commencement, Timing and Delivery

Work commences only after the Client has accepted the Quote in writing, supplied the documents needed for the agreed scope, and paid 100% of the quoted estimating fee (including applicable GST) in cleared funds. Our usual target for standard, fully documented estimating jobs is 48 hours (two business days), calculated across Monday to Friday only and excluding Victorian public holidays, from that point unless the Quote states another timeframe. If the final commencement requirement is met on a weekend or Victorian public holiday, the turnaround period begins on the next business day. This is an indicative target, not a guaranteed deadline.

Large, complex, commercial, apartment, multi-unit, heavily revised or incomplete packages may require an individually agreed programme. If a material delay becomes apparent, we will notify the Client and provide a revised expected completion date. Deliverables are generally supplied electronically to the nominated contact.

08 Fees, GST, Invoices and Expenses

The Client must pay 100% of the agreed estimating fee, plus applicable GST, upfront before estimating work commences. We will issue an invoice setting out the total payable amount, and payment in full is required before work is scheduled or started. No deposit-only, instalment or payment-on-completion arrangement applies unless expressly agreed by both parties in writing.

Additional out-of-scope work, approved variations and chargeable third-party expenses require the Client’s written approval before they are incurred. Any agreed additional fees are payable upfront before the additional work begins, unless otherwise agreed in writing. Where full payment or required documents are outstanding, the commencement date and turnaround period remain on hold. Payment does not affect the Client’s statutory rights, including refund rights where applicable.

09 Clarifications, Corrections and Variations

The quoted fee includes one reasonable round of minor clarifications requested within 10 business days after delivery, provided the original drawings, design and scope have not changed. We will investigate and correct errors in the agreed Deliverables attributable to our work without an additional fee, consistent with applicable legal obligations. This administrative timeframe does not limit any rights under the Australian Consumer Law.

New drawing revisions, specification changes, additional dwellings or areas, added trades, remeasurement, tender addenda or changes in deliverable format may require a variation. We will explain the impact on fee and turnaround and seek the Client’s written approval before proceeding with additional chargeable work.

10 Purpose and Permitted Reliance

Deliverables are prepared for the specific project(s), drawing revisions, location and purpose described in the Quote. They are intended to inform estimating, budgeting, tender preparation and related construction cost decisions and must be read together with all qualifications and assumptions.

Our work is not a structural or code-compliance certification, site condition report, contractual building price, bank valuation or guarantee of profit, tender success or final cost. The Client is responsible for deciding how to use the estimate and for obtaining independent specialist advice where required. Nothing in this clause reduces our obligation to exercise reasonable care and skill.

11 Intellectual Property and Licence

The Client retains ownership of its original plans and supplied documents. We retain ownership of our pre-existing tools, methods, templates, databases and working processes. Once the relevant service fees are paid, the Client receives a perpetual, non-exclusive licence to use, copy and share the supplied Deliverables for the project(s) and business purpose expressly identified in the Quote, including with its builder, consultants, financier, suppliers or tender team.

A Master BOQ expressly commissioned for production use may be reused for the nominated design(s) as described in the Quote. Neither party may otherwise sell, publish or commercially exploit the other party’s protected material for unrelated projects without prior written agreement. This does not prevent fair use of the Client’s underlying project information.

12 Confidentiality and Records

Each party will keep the other party’s non-public technical, commercial and project information confidential, use it only for the engagement and disclose it only to personnel, advisers or service providers who reasonably need to know and are subject to appropriate confidentiality obligations, or where disclosure is legally required.

We will take reasonable steps to protect and securely store project files and may retain working records for legal, insurance, audit and ordinary business-record purposes, subject to applicable law. Personal information, if collected, will be handled in accordance with applicable privacy obligations.

13 Disclosure to Third Parties

The Client may share the Deliverables within the permitted licence in clause 11, provided relevant assumptions, exclusions and qualifications accompany them. A person relying on a Deliverable outside the agreed purpose or after material design, timing or market changes should seek an updated review. We do not accept a separate duty to an unrelated third party merely because the Client gives that party a copy, except where the law provides otherwise.

14 Cancellation and Work on Hold

The Client may cancel an engagement by giving written notice. The Client is liable only for the reasonable value of Services properly performed up to cancellation and any pre-approved, non-recoverable third-party expenses, less costs saved and any amounts already paid. Any excess prepayment will be refunded within a reasonable time, subject to applicable law.

If the Client fails to supply essential information after reasonable written requests, we may agree to place work on hold or, after reasonable written notice, end the engagement and account for work actually completed. If we cannot complete the Services, we will notify the Client and refund amounts attributable to Services not provided, subject to any other legal remedies.

15 Australian Consumer Law

Nothing in these Terms excludes, restricts or modifies a right or remedy that cannot lawfully be excluded, including applicable consumer guarantees under the Australian Consumer Law. Where those guarantees apply, Services must be supplied with due care and skill and comply with other applicable statutory guarantees. Any right to a remedy for a failure is preserved notwithstanding provisions concerning estimates, timing, revisions, payment or liability.

16 Allocation of Risk and Liability

Each party remains responsible for its own acts and omissions. To the maximum extent permitted by law, and excluding liability for non-excludable statutory rights, fraud, wilful misconduct, gross negligence, breach of confidentiality or misuse of intellectual property, our total liability for other claims directly arising from a particular estimating engagement is limited to twice the fees paid or payable for that engagement.

The cap is intended to reflect the limited fee and advisory scope of the engagement and does not excuse a failure to provide the Services with reasonable care and skill. We are not responsible for losses caused to the extent they arise from inaccurate or omitted information supplied by others, unauthorised changes to Deliverables, or use outside the agreed purpose. Nothing in this clause excludes liability where doing so would be unlawful or unfair under applicable legislation.

17 Dispute Resolution

If a concern arises, either party should describe it in writing with relevant supporting information. The parties will first attempt to resolve the concern through good-faith discussion within 10 business days (or another mutually agreed period). If it remains unresolved, they may agree to independent mediation. Neither party is prevented from seeking urgent relief or using statutory or court/tribunal processes.

18 General Terms

Changes to the agreed scope or these Terms must be confirmed in writing by both parties. Notices relating to an engagement may be sent to the email addresses used in the Quote unless updated in writing. Neither party is responsible for delay caused by events beyond its reasonable control where it takes reasonable steps to minimise the disruption and promptly notifies the other party; this does not excuse payment for Services properly supplied or remove statutory remedies.

If a provision is unenforceable, the remainder continues to the extent legally possible. These Terms are governed by the laws of Victoria, Australia, subject to any mandatory law applying to a Client in another jurisdiction. The parties submit to the courts and tribunals with competent jurisdiction.

Contact

Call George on 0421 307 603 or email estimating@gabuildinggroup.com.au.